Electric Soft sealed Butterfly Valve3
Electric Soft sealed Butterfly Valve4
Electric Soft sealed Butterfly Valve1
Electric Soft sealed Butterfly Valve2
tri logo

Electric Soft-sealed Butterfly Valve

Soft-Seated Electric Butterfly Valve is a valve operated by an electric actuator, equipped with a flexible sealing element to ensure tight shut-off and prevent leakage in fluid control systems.

Get Best Price
Exploded View of Electric Soft Seal Butterfly Valve

Product Introduction

The electric soft-seal butterfly valve features a pinless structure, which effectively prevents pin detachment during long-term operation. It also offers bi-directional sealing, allowing installation in any orientation without restrictions imposed by medium flow direction or spatial constraints.The sealing pair is composed of stainless steel and nitrile oil-resistant rubber, which greatly enhances sealing performance and effectively extends the service life of the product.

特点

  • Adopting a pinless structure, it effectively prevents pin detachment during long‑term operation.
  • This valve features bi‑directional sealing, allowing installation regardless of medium flow direction or spatial position. It can be installed in any orientation.
  • The sealing pair is made of stainless steel and nitrile oil‑resistant rubber, which effectively extends service life.
  • It offers remarkable economic efficiency, especially for large‑bore butterfly valves.
  • (Butterfly valves are the preferred choice for medium and low‑pressure applications.)
  • Thanks to its superior cost‑effectiveness, butterfly valves are widely used in industrial automatic control systems in
  • food, environmental protection, light industry, petroleum, paper making, chemical industry, shipbuilding, urban water supply and drainage, electric power, and other industries.

Basic Parameters

Nominal Bore (DN): DN40~DN800
Operating Power: AC110V / AC220V / AC380V / DC24V
Medium Temperature: -20℃~120℃
Ambient Temperature: -30℃~60℃
Nominal Pressure (PN): 0.1~2.5MPa
Actuation Time: 15S / 30S / 60S
Control Method: Modulating or On/Off Control
Pneumatic Action Mode:
- Single Acting (with spring return) - Double Acting
Connection Types:
- Wafer Type - Flange Type
Sealing Type: Soft Seal
Test Pressure:
- Shell Test: 1.76MPa - Seal Test: 2.4MPa
Protection Grade: IP67

Material Specifications

Body & Internal Components

Valve Body Material: WCB, QT450-10, HT200, HT250, SUS304, SUS316
Valve Plate Material: WCB, QT450-10, HT200, HT250, SUS304, SUS316
Rotating Shaft Material: 2Cr13
Sealing Ring Material: Nitrile Oil-resistant Rubber, EPDM, PTFE, PPL, etc.
Valve Stem Seal: NBR, HNBR
Packing Material: Flexible Graphite

Suitable Media

  • Water
  • Oil Products
  • Gas
  • Corrosive Media

Standards Compliance

Manufacturing: GB/T 12238-2008
Flange:
- GB/T 9124.1-2019 - GB/T 9124.2-2019 - GB/T 17241.6-2008
Structure Length: GB/T 12221-2005
Testing: GB/T 13927-2022

Main Parameters

Nominal DiameterDN40~DN800
Power SupplyAC110V, AC220V, AC380V, DC24V
Medium Temperature-20~120℃
Ambient Temperature-30℃~60℃
Nominal Pressure0.1~2.5MPa
Actuating Time15S / 30S / 60S
Applicable MediumWater, oil, gas, corrosive medium, etc.
Control ModeOn-off or modulating control
Pneumatic ActuationSingle acting (with spring return) or double acting
Connection TypeWafer type / Flange type
Sealing TypeSoft seal
Test PressureShell test: 1.76MPa
Seal test: 2.4MPa
Body MaterialWCB, QT450-10, HT200, HT250, SUS304, SUS316
Disc MaterialWCB, QT450-10, HT200, HT250, SUS304, SUS316
Shaft Material2Cr13
Seal Ring MaterialNBR (oil-resistant), EPDM, PTFE, PPL, etc.
Stem SealNBR, HNBR
Packing MaterialFlexible graphite
Protection GradeIP67
Design StandardGB/T 12238-2008
Flange StandardGB/T 9124.1-2019, GB/T 9124.2-2019, GB/T 17241.6-2008
Face-to-Face StandardGB/T 12221-2005
Inspection StandardGB/T 13927-2022

Dimension Drawing

1.Installation Dimension Chart of Wafer Type Explosion-proof Electric Butterfly Valve

1 200616113620214
Nominal Diameter
(mm) 
LDN-ΦDH2H1W1W2
4033------4821013876
5042.61254-Φ1870314160137
6545.61454-Φ18 76327160137
8045.61604-Φ1889333160137
10051.61804-Φ22104385196145
12555.62104-Φ22120400196145
15055.62404-Φ23139442255182
20059.62954-Φ23175480255182
25067.63554-Φ28203522255182
30077.64104-Φ28242537255182
350774704-Φ28277.5555354273
40086.55254-Φ30309590354273
450105.65854-Φ30337610354273
500131.86504-Φ33361670354273
6001527704-Φ364591110520470
7001638404-Φ365271180520470
8001889504-Φ395941220520470

Wafer Type Compatible Flange

2 1Z102145019120 8
Nominal Diameter
(mm)
DD1D2D3D4n-ΦHD5
501651255952524-Φ 182062
6518514512275674-Φ 182078
8020016013391828-Φ 182091
1002201801581101028-Φ 1822116
1252502101841351278-Φ 1822142
1502852402121611528-Φ 222417010 
20034029526822120812-Φ 222622110 
25040535532027525512-Φ 262927510 
30046041037032730812-Φ 263232614 
35052047043037935516-Φ 263435814 
40058052548242940516-Φ 303640914 
45064058553248145520-Φ 303846016 
50071565058553250520-Φ 334251116 
60084077068563360520-Φ 364461318 

2.Installation Dimension Chart of Flanged Explosion-proof Electric Butterfly Valve

法兰电动蝶阀尺寸图
Nominal Diameter
(mm)
D1D2N-ΦDLH2H1W1W2
501251654-Φ1810870288196145
651451854-Φ1811276301196145
801602004-Φ1811489313196145
1001802208-Φ18127104328196145
1252102508-Φ18140120348196145
1502402858-Φ23140132368196145
2002953408-Φ23152167435255182
2503503512-Φ23165202474255182
30040044512-Φ23178239502255182
35046050516-Φ23190265537255182
40051556516-Φ28216308640354273
45056561520-Φ28222341662354273
50062067020-Φ28229381700354273
60072578020-Φ31267476803354273
70084089524-Φ34292520866354273
800950101524-Φ37318591949354273

Circuit Diagram

S

S

Switching Action Mode:Switching operations (open/close) are achieved via AC switching signals, and a set of active position signals indicating fully open/fully closed status are output.

MS

MS

Switching Action Mode: Outputs passive contact signals. Structure:Equipped with two intermediate position switches.

PIU

PIU

Switching Action Mode: Outputs 0~1000Ω feedback signal. Structure: Equipped with 500Ω or 1kΩ potentiometer.

CPT

CPT

Switching Action Mode:
Outputs 4~20mA valve position feedback signal. Structure: Equipped with 1kΩ potentiometer and R/I converter.

PCU

PCU

Regulating Action Mode:Accepts 4~20mA control signal input and outputs 4~20mA valve position feedback signal. Structure: Integrated with 1kΩ potentiometer and control module (servo amplifier).

G

G

DC switching signals are output from the circuit via an external DC power supply to control the opening/closing program, and a set of passive contact signals corresponding to fully open/fully closed positions are provided.

SP

SP

Switching Action Mode: 
Controls valve opening angle via switching circuit, corresponding to potentiometer resistance value, while enabling intermediate position control function. Structure: Integrated with potentiometer and intermediate position switch.

H

H

Three-phase AC switching signals are output through an external three-phase power phase-reversing circuit to control opening/closing operations, accompanied by a set of passive contact signals for fully open/fully closed position indication.

Circuit Diagram

S

S

Switching Action Mode:Switching operations (open/close) are achieved via AC switching signals, and a set of active position signals indicating fully open/fully closed status are output.

MS

MS

Switching Action Mode: Outputs passive contact signals. Structure:Equipped with two intermediate position switches.

PIU

PIU

Switching Action Mode: Outputs 0~1000Ω feedback signal. Structure: Equipped with 500Ω or 1kΩ potentiometer.

CPT

CPT

Switching Action Mode:
Outputs 4~20mA valve position feedback signal. Structure: Equipped with 1kΩ potentiometer and R/I converter.

PCU

PCU

Regulating Action Mode:Accepts 4~20mA control signal input and outputs 4~20mA valve position feedback signal. Structure: Integrated with 1kΩ potentiometer and control module (servo amplifier).

G

G

DC switching signals are output from the circuit via an external DC power supply to control the opening/closing program, and a set of passive contact signals corresponding to fully open/fully closed positions are provided.

SP

SP

Switching Action Mode: 
Controls valve opening angle via switching circuit, corresponding to potentiometer resistance value, while enabling intermediate position control function. Structure: Integrated with potentiometer and intermediate position switch.

H

H

Three-phase AC switching signals are output through an external three-phase power phase-reversing circuit to control opening/closing operations, accompanied by a set of passive contact signals for fully open/fully closed position indication.

Documents & Drawings:

GRAT Soft sealed Btterfly Valve Selection Catalog 202606 页面 01
GRAT-Soft-sealed Btterfly Valve Selection Catalog
Electric Butterfly Valve Instruction Manual
Electric Butterfly Valve Instruction Manual

May we assist you?

If you have a question or comment,
please email us at [email protected]

INQUIRY

Frequently Asked Questions

Find answers to commonly asked questions about our products and services.

GRAT Iot mini motorized control valve

IoT Series

Electric Series

EX Series

Pneumatic Series

Scroll to Top